歡迎來到濟南sungame988園林工程有限公司官方網站
熱銷產品關鍵詞: 濟南假山製作 濟南上水石假山 濟南庭院景觀
產品 新聞
  • 濟南上水石假山
  • 濟南真石假山
  • 濟南庭院景觀
新聞中心
新聞推薦
聯係sungame988
  • 服務熱線:15610114816
  • 地址:濟南市仲宮鎮商家
行業新聞
當前位置:首頁 > 新聞中心 > 行業新聞 > 假山定位放樣對石材厚度的要求

假山定位放樣對石材厚度的要求

來源:http://www.aomapaint.cn/industry/96.html  更新時間:2017-11-30
1、定位放樣:根據圖紙、模型及現場情況進行定位放樣。
1, positioning setting out: positioning and setting out according to the drawings, models and field conditions.
2、預埋件埋置:現澆板塊采用70*100*6的預埋件,間距1.5-2.5m埋置;框架柱身采用70*100*6的預埋件,間距2m埋置。
2, embedded parts embedded: cast-in-situ plate using 70*100*6 embedded 1.5-2.5m embedded frame column spacing; using 70*100*6 embedded 2m embedded space.
3、骨架製作:主材為50*50*5角鋼,次要處用30-30-3角鋼,塗刷防鏽漆進行防鏽處理,先進行塑石方形骨架製作,骨架角鋼的間距尺寸一般控製在1.8-2.5m左右,連接采用焊接方式,然後根據模型進行左右斜拉,做出假山的大致形狀。
3, skeleton production: advocate for 50*50*5 angle, 30-30-3 angle with the minor, brushed with antirust paint Antirust processing, advanced production line stone plastic square frame, frame angle pitch control in general about 1.8-2.5m, connected by welding, then according to the model about cable-stayed, shape to make rockery.
4、鋼筋網片:在骨架製作完成後,用76圓鋼進行鋼筋網製作,鋼筋網與角鋼連接及鋼筋與鋼筋連接均采用焊接方式,鋼筋網方格控製在18*18-25*25cm2左右,根據模型塑造出凹凸起伏的自然外形。
4: in the steel mesh skeleton after completion of production, with the 76 round of steel mesh production, steel mesh and connecting angle connection and reinforced bars are welded, steel grid control in about 18*18-25*25cm2, according to the model shape of concave convex natural shape.
5、鐵絲網片:在鋼筋網製作完成後,將規格為3*1/4(4目)的鐵絲網綁紮其上麵。
濟南假山製作
5, wire mesh: after the completion of the steel mesh production, the specification of the 3*1/4 (4 mesh) wire mesh above it.
6、抹灰:鐵絲網片安裝完成後,用1:1水泥砂漿進行基層抹灰,厚度為1-1.5cm左右,一次完成後,進行二次抹灰,厚度為1.5cm左右。在假山外露部分的兩層抹灰完成後,及時進行假山內部砂漿的抹製,厚度為1cm左右。
6, plastering: after the completion of the wire mesh installation, the 1:1 cement mortar is used for basic plastering, the thickness is about 1-1.5cm. Once completed, the plastering time is two times, the thickness is about 1.5cm. After the two layer plastering of the rockery is completed, the mortar inside the rockery is made in time, with a thickness of about 1cm.
7、造型:根據模型及所造山石的材質,對塑石假山進行造型,塑出石脈和條紋。
7, modeling: according to the model and the material made of the stone, the plastic rockery is molded, the stone veins and the stripes are made.
8、上色:根據所塑山石的位置及其作用,選擇合適的氧化鐵顏料進行調製、上色。
8, color: according to the position of the plastic mountain stone and its function, choose the appropriate iron oxide pigment for modulation and color.
公司全方位服務於客戶,以質量上乘、價格合理和完善的售後服務與客戶攜手奮進,共同發展。質量保證,歡迎谘詢洽談。
The company serves the customer in all directions, with the high quality, the reasonable price and the perfect after sale service and the customers to advance hand in hand, and develop together. Quality assurance, welcome to consult the negotiation.
相關新聞
相關產品